Load data for .260 PICRA + .264 | 160gr | Hornady InterLock RN

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.264 \| 160gr \| Hornady InterLock RN
Manufacturer SKU:	2640
Bullet Weight:	160gr \| 10.4g
Bullet Diameter:	0.264" \| 6.71mm
Bullet Length:	<<locked>>
Caliber:	.260 PICRA load data
Case Length (l3):	1.515" \| 38.5mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	38.6 Grains of Water \| 2.51 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	56565 psi \| 3900 bar
LID:	LID_B2601_C251
Last updated:	2026-01-22

Load data for 46 loads in caliber .260 PICRA with .264 | 160gr | Hornady InterLock RN bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	65%	50705	90%	**89	100%
ADI APS 350	<<locked>>	74%	50850	90%	**58	100%
ADI APS 450	<<locked>>	72%	50154	89%	**65	100%
ADI AS 30	<<locked>>	68%	50589	89%	**78	100%
Accurate No. 11 FS	<<locked>>	64%	49864	88%	**14	100%
Accurate Solo 1000	<<locked>>	64%	49951	88%	**78	100%
Accurate Solo 1250	<<locked>>	62%	50299	89%	**94	100%
Baschieri & Pellagri 100	<<locked>>	62%	50198	89%	**75	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	76%	49487	87%	**61	100%
Hodgdon Clays	<<locked>>	72%	50618	89%	**61	100%
Hodgdon TrailBoss	<<locked>>	96%	33098	59%	**8	100%
Maxam CSB 1	<<locked>>	65%	49806	88%	**91	100%
Maxam CSB 3	<<locked>>	63%	49269	87%	**78	100%
Maxam CSB 4	<<locked>>	64%	50894	90%	**84	100%
Maxam CSB 5	<<locked>>	63%	49168	87%	**55	100%
ReloadSwiss RS 14	<<locked>>	95%	33315	59%	**8	100%
ReloadSwiss RS 30	<<locked>>	71%	49661	88%	**07	100%
SNPE Vectan A0	<<locked>>	63%	50807	90%	**17	100%
SNPE Vectan BA10	<<locked>>	67%	49197	87%	**58	100%
SNPE Vectan BA6 1/2	<<locked>>	76%	49617	88%	**52	100%
Somchem S265	<<locked>>	70%	50647	90%	**14	100%
Vihtavuori N110	<<locked>>	68%	50343	89%	**94	100%
Vihtavuori N32C Tin Star	<<locked>>	87%	50908	90%	**45	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	45295	80%	**37	100%
ADI APS 350	<<locked>>	61%	40089	71%	**47	100%
ADI APS 450	<<locked>>	61%	39972	71%	**56	100%
ADI AS 30	<<locked>>	61%	43236	76%	**02	100%
Accurate No. 11 FS	<<locked>>	61%	45252	80%	**68	99%
Accurate Solo 1000	<<locked>>	61%	46209	82%	**38	100%
Accurate Solo 1250	<<locked>>	61%	48298	85%	**81	100%
Baschieri & Pellagri 100	<<locked>>	61%	48269	85%	**55	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	35549	63%	**17	100%
Hodgdon Clays	<<locked>>	61%	41379	73%	**63	100%
Hodgdon TrailBoss	<<locked>>	72%	22872	40%	**7	100%
Maxam CSB 1	<<locked>>	61%	46122	82%	**58	100%
Maxam CSB 3	<<locked>>	61%	47384	84%	**58	100%
Maxam CSB 4	<<locked>>	61%	47210	83%	**52	100%
Maxam CSB 5	<<locked>>	61%	47253	84%	**35	100%
ReloadSwiss RS 14	<<locked>>	69%	21973	39%	**0	100%
ReloadSwiss RS 30	<<locked>>	61%	36129	64%	**40	100%
SNPE Vectan A0	<<locked>>	61%	48892	86%	**11	100%
SNPE Vectan BA10	<<locked>>	61%	44048	78%	**02	100%
SNPE Vectan BA6 1/2	<<locked>>	61%	32982	58%	**61	100%
Somchem S265	<<locked>>	61%	38943	69%	**63	99%
Vihtavuori N110	<<locked>>	61%	40582	72%	**83	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	31299	55%	**5	100%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data